Full Hot Air Lead-Free Reflow Oven with CE (E10) , Reflow Oven
|FOB Price:||US $5,800 / Set|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $5,800/ Set|
|Payment Terms:||L/C, T/T, Paypal, Money Gram|
- Model NO.: ETA-E10
- Warranty: 24 Months
- Demoulding: Automatic
- Function: High Temperature Resistance
- Condition: New
- Certification: CE, ISO, CCC, CE, FCC, CCS, ABS
- Automatic Grade: Automatic
- Heating System: Electric
- Mould Life: 300,000-1,000,000 shots
- Customized: Non-Customized
Full Hot Air Lead-Free Reflow Oven with CE (E10), reflow oven
Model: E10 Lead-free Reflow Oven(10-zone)
Brief: smt lead-free reflow oven
> Eight groups of top and bottom forced hot air convection heating zones.
> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
> Power consumption savings of 1/3 as compared to other systems.
> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.
> Two (2) groups of forced air convection cooling zones.
Distortion-free Conveyor System with Automated Chain Lubrication
> Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support.)
> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
> Automated chain lubrication system with a computer controlled central reservoir. Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.
Fresh Air Recharge System
> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.
Flux Management System
> Air amplifier forces supercharged flux collection and recirculation.
> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.
> PC control system with windows based control software.
> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
> Swing arm control PC station
> Four (4) emergency stop switches
> Two (2) exhaust ports
> SMEMA interface
> System documentation
|Standard Color||Computer Grey|
|Number Of Heating Zones||Up10/Bottom10|
|Length Of Heating Zones||3200mm|
|Exhaust Volume||10M3/minx2 Exhausts|
|Standard Feature Of Control System|
|Electric Supply Required||3phase, 380V 50/60Hz|
|Power For Warm Up||35KW|
|Warming Time||Approx. 20 minute|
|Temp. Setting Range||Room Temp. --- 300 degree|
|Temperature Control Method||PID Close Loop Control + SSR Driving|
|Temperature Control Precision||± 1.0 degree|
|Temperature Deviation on PCB||± 1.5 degree (by MR Board Test Standard)|
|Heating Element||Especial Heating elements For Long Life ;|
|Commutated Element||Aluminium Alloy Plate|
|Max. Temp. Gap Between Preheat & |
|Max. Temp. Gap Between Preheat |
|Max. Temp. Gap Between Reflow Zones Setting||50 degree|
|Data Storage||Process Data and Status Storage|
|Abnormal Alarm||Abnormal Temperature (Extra-high / Extra-low Temp. )|
|Board Dropped Alarm||Tower Light: Yellow- Warming; Green-Normal; Red-Abnormal|
|Features Of Conveyor System|
|Rail Number||1 Lane|
|Max. Width Of PCB||320mm (Option: 610mm )|
|Components Clearance||Top/ Bottom Clearance of PCB is 25mm|
|Converyor Direction||L→ R (Option: R→ L)|
|Fixed Rail Side||Front Rail Fixed(Option: Rear Rail Fixed)|
|Transmission Agent||Air-Reflow = Chain + Mesh , N2-Reflow=Chain(Mesh is option)|
|Center Support (Option)||Preventing PCB warp such too wide and heavy component load|
|Converyor Speed Range||300 - 2000mm/min|
|Temp. Thermocouple Slot||Standard|
|Driven Top Hood Opening||Standard|
|On Line Editing||Standard|
|Cooling Method||Forced-Air (Standard), Water-Chiller (Option)|
|Model for Nitrogen Process|
|Power For Warm Up||40KW|
|Flux Management System||Flux Reclaimed and Filtration standard for N2 Oven, easy clean-up.|
|N2 containment at Entry and Exit End||Standard|
|Flux Reclaim System||Standard|
|Nitrogen Flow Meter||Standard|
|Nitrogen Consumption [Standard]||400~1000PPM 20M³ /H|
|Water Chiller||3 HP ; External Stand-alone Type ; Powerful Cooling suit to Lead-Free Process Required|